![]() ![]() I am afraid that without your file this is all I could find, suggest you double check your "Compensation" settings and upload your file to get more help. The last image is with the Compensation set to "OFF" and that does have the correct simulation so if the simulation was showing correctly what is happening it would be picked up when viewed. This is how I believe it should show if there is no compensation as per "In Control" setting.Īs you can see from the images although the tool paths are different for the "In Computer" and the "In Control" the simulation is exactly the same. However the simulation still goes around instead of the cenre of the tool being on the toolpath, confusing!! Interested in a structured lesson on 2D Contour Tool tab settings. Typically a finishing operation, but Contour can be used to take multiple cuts. The machining area can be selected from Edges, Sketches or a Solid face. ![]() In the example, we’ll show how you can edit, delete, and modify those. 2D Contour allows you to machine profiles. That’s because selecting contours directly off the model in Fusion CAM is great most of the timeuntil it isn’t. I can get 1 open contour but I cant seam to get the other 3 to open. Im using a 12MM Ball Nose Endmill to do the roughing. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry. Toolpath set to "In Control" shows the toolpath on the selected edge, no offset. It’s time for another CAM QUICK TIP, this time covering something we get questions on all the time: contour selection. Talk shop with the Fusion 360 Manufacture Community. ![]() The simulation shows the tool correctly going around the shape. See images below and attached f3d file.Ĭontour set to "In Computer" shows it is offset. So if I have accidently or on purpose set the offset to "In Control" or "Wear" then the simulation will still go around the shape as if it was offset so unless the user has noticed that the actual toolpath for the Contour has moved which if there are a number of toolpaths in the job that could easily be missed. I have tried to re-create the issue you have and the only thing I can find is that there is an issue with the simulation in that it will go around the shape with an offset regardless of whether or not an offset has been set so the bug would appear to be in the simulation because when the code is checked it does follow the toolpath with the center of the tool when set to "In Control", when set to "In Computer" in the code it is offset and runs with the side of the tool on the toolpath. To select and edit contours: In the geometry tab of a CAM operation, select the drop-down icon for 'Add geometry feature'. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |